Home > Products > Machining Center
  • VMC-1890 Milling cnc vertical machining center

  • VMC-1890 Milling cnc vertical machining center

  • VMC-1890 Milling cnc vertical machining center

  • VMC-1890 Milling cnc vertical machining center

VMC-1890 Milling cnc vertical machining center

Quick Details:

VMC-1890 Milling cnc vertical machining center 

Vmc-1890 vertical machining center series machine tools adopt Japanese imported control system (Mitsubishi M80) and its supporting servo driver and motor to realize three-axis linkage. The utility model is suitable for parts with appropriate batches that are complex, have many processes, have high precision requirements, need various types of ordinary machine tools and various cutting tools and tooling, and can be processed only after multiple clamping and adjustment.
The vertical machining center mainly processes box, complex curved surface, special-shaped parts, plates, sleeves and plates. It is widely used in machinery, automobile, aircraft, aerospace, shipbuilding, national defense and other fields.


1. The main parts of the fuselage are made of high-quality cast iron, the internal muscles and bones are strengthened, all tempered, and finite element analysis is carried out by special design software. It has the characteristics of high strength, good stability and not easy to deform, ensuring the rigidity of the whole machine and the accuracy and stability of long-term use.
2. The transmission parts adopt German fag precision bearings and German Rexroth high-quality guide rails. The pre stretching process is adopted for the installation of the ball screw, which not only improves the rigidity of the transmission parts, but also eliminates the elongation of the ball screw caused by the thermal stress effect during the temperature rise of the ball screw during operation, and improves the retention of precision in the long-term use of the machine tool.
3. The box type spindle head structure has reinforced internal muscles and bones, and is equipped with Luoyi spindle, a famous brand in Taiwan. It adopts P4 grade ultra-precision oblique angle ball bearing and large span support design, so that the spindle can withstand strong radial and axial thrust and eliminate vibration under heavy load cutting.
The company's vmc-1890 vertical machining center series machine tools have been mass produced and widely used in various industries. After continuous improvement, the products are more convenient to use and more stable and reliable in precision.


Model

VMC-1890

X-axis Travel mm

1800

Y-axis Travel mm

900

Z-axis Travel mm

380

Spindle end to table mm

16-840

Spindle speed rpm

6000

Spindle motor power kw

22

Three axis motor power kw

X7/Y7/Z7

Table area mm

900*2000

T-groove (groove * width * center distance) mm

5-22*165

X-axis rapid displacement mm/min

15000

Y-axis rapid displacement mm/min

15000

Z-axis rapid displacement mm/min

12000

feed rate mm/min

1-5000

Spindle taper

BT50

Prop quantity

32

Maximum tool diameter mm

240

Maximum tool length mm

305

Tool weight kg

15

Tool magazine category

Bamboo hat / knife arm

Air pressure source kg/cm²

9

Bearing of worktable kg

2300

Machine tool weight kg

15500






WeChat

Whatsapp

Skype

E-mail