Quick Details:
4HGV Turret Milling Machine
Ⅰ、Characteristics of Machine.
1.The whole machine adopts Mihanna high-grade castings.
2.High frequency quenching and hardening treatment of spindle tube surface is hard chromium plating and precision grinding.
3.Front, rear and left (X, Y axis) sliding with wear resistant sheet (Turcite-B).
4.High frequency quenching and precision grinding of front and rear slides.
5.High precision 7207 CP4 spindle bearing.
6.X, Y and Z axes are dovetail groove slides
Ⅱ、Standard configuration:
1.Pull rod
2.Operational Manual
3.Manual oiler
4.Front and rear scrap shield
5.Domestic quartz lamp
6.Simple Electric Box
7.Tools and Toolboxes
Ⅲ、Technical parameters are detailed in the table.
Machine Model | 4HGV | ||
Working Surface Area of Table | 254*1270 | ||
10”*50” | |||
Travel | X-axis(mm) | 800 | |
Y-axis(mm) | 400 | ||
Z-axis(mm) | 400 | ||
Track | Y-axis(mm) | ■Square | |
Z-axis(mm) | ■Square | ||
Spindle | Spindle Taper | R8/NT30 | |
Spindle Speed（mm) | 127 | ||
Spindle Speed | 16（steps)/variable | ||
Spindle Feed（mm) | 0.076/0.003” 0.038/0.0015” 0.203/0.008” | ||
Low Range(r/min) | 66、110、175、270、550、930、1460、2270/variable | ||
High Range(r/min) | 132、220、350、540、1100、1860、2920、4540/60、4200 | ||
T-slot | Solt Number* Width(mm) | 3*16 | |
T-slot Pitsh(mm) | 65 | ||
Motor | Voltage (V) | 220/380/415 | |
Frequency (HZ) | 50/60 | ||
Head motor | 3HP/2.2kw | ||
Cooling motor | 1/8HP | ||
Lifting motor | / | ||
Max Working Piece Weight（kg) | 300 | ||
Saddle W*L（mm） | 280*510 | ||
Ram travel（mm） | 370 | ||
Spindle Diameter(mm) | 85.7 | ||
Distance from spindle center to fuselage | Min（mm） | 220 | |
Max（mm） | 590 | ||
Distance from spindle end to worktable | Min（mm） | 85 | |
Max（mm） | 485 | ||
Machine Dimension L*W*H（mm） | 1670*1680*2152 | ||
Net Weight（kg） | 1380 | ||
