Home > Products > Radial Drilling Machine
  • Z3063-Radial Drilling Machine

Z3063-Radial Drilling Machine

Quick Details:

Product Introduction :

The radial drill is widely used in machining. It can be used for drilling, reaming, countersinking, reaming and tapping. It can also be used for boring under the condition of technological floor clam.

Product Features :

a. The appearance is generous and the overall layout is symmetrical and harmonious.

b. It is easy to operate with mechanical speed change.

c. The structure is reliable and the manufacture is excellent, which can ensure the accuracy of the machine tool.

d. The electrical system is safe and reliable.

Techical Parameters :


Technical parameters of Z3063 × 20 / 1 radial drilling machine

 Maximum borehole diameter


 Carbon steel 63

 Distance between spindle center line and column bus



Distance between spindle end face and base working face



Spindle travel


 Manual 315, motor-driven 315

Spindle taper hole (Morse)


Spindle speed range



Spindle speed series


Spindle feed range



Spindle feed series


Table size



Horizontal movement distance of headstock



Main motor power



Machine weight



Machine tool width × width



Working environment temperature of machine tool

 Size between 55 degrees, avoid direct sunlight

Working temperature of machine tool

 Less than 75 degrees

The machine tool is far away from the environment with excessive dust and corrosive gas. In order to improve the permanent accuracy of the machine tool, if possible, the machine can be installed in a relatively closed place, and air conditioning can be installed to keep constant temperature